The base station self-organizing network DJHW/JZ-40-100M-C is designed according to the software defined radio architecture, utilizing advanced technologies such as MIMO and HARQ, efficient encoding and decoding techniques, and miniaturized RF front-end technology, combined with the MESH multi hop self-organizing network protocol.
It has networking characteristics such as decentralized, self-organizing, adaptive, and self-healing, making it the best choice for comprehensive business communication in point-to-point, point to many, and many to many scenarios.
The product can build a regional wireless coverage network, providing MESH wireless access for broadband mobile users, greatly improving command efficiency in military, armed police, emergency and other scenarios.
The base station equipment has the characteristics of small size and light weight, can transmit 2 * 10W power, and is easy for operators to carry, making it very suitable for emergency personnel operations.
DJHW/JZ-40-100M-C has the following characteristics:
Lightweight and easy to install
The overall weight does not exceed 2300 grams and the volume is compact;
Topology adaptability
Support subnet splitting and fusion features;
Support three propagation methods: unicast, multicast, and broadcast;
MESH supports networking with 32 nodes;
Dynamic frequency hopping
Support frequency hopping and anti-interference between frequency bands;
adaptive modulation
Supports QPSK, 16QAM, and 64QAM modulation methods;
business types
Support network port data transmission access capability;
Transmission distance
Supports 2 * 10W power amplifiers, with a visual transmission distance of 48km;
Flexible deployment
Flexible installation and deployment, suitable for various application scenarios such as vehicle mounted and ship mounted;
Instructions for Use:
The DJHW/JZ-40-100M-C product requires a power supply of 12V 1.5A or higher. Before starting up, check if the antenna and connecting wires are properly connected. The main antenna (antenna identification MAIN) must be connected to the antenna, and the secondary antenna (antenna identification AUX) is not necessary. Not connecting the antenna will affect transmission stability.
Please be sure to install the antenna before powering on to avoid damaging the circuit. The distance between the two antennas should be greater than 15cm, and the antenna should be kept away from large metal structures as much as possible to avoid communication obstruction due to the above reasons.
Automatic power control:
The DJHW/JZ-40-100M-C product has a maximum rated transmission power of 40dBm ± 2dBm.
Bandwidth configuration:
The DJHW/JZ-40-100M-C product supports channel bandwidths of 1.4MHz, 3MHz, 5MHz, 10MHz, and 20MHz.
Transmission distance:
The DJHW/JZ-40-100M-C product supports a transmission distance of 48KM (optional: choose the appropriate version according to the actual application scenario).
*The application scenario refers to the situation where the master and slave devices are fully connected and there is no same frequency interference.
(DJHW/JZ-40-100M-C Product Physical)
DJHW/JZ-40-100M-C product interface:
Ad hoc network antenna: N heads of ad hoc network antenna.
L Ethernet port: Ethernet aviation port.
L indicator light: status indicator light.
WIFI antenna: SMA antenna.
Power interface: Connect with the drone power supply.
*Do not place other electronic devices too close to the device antenna to avoid affecting the bottom noise of the device.
*When pulling the distance, try to make the ground antenna unobstructed by obstacles, and place the ground antenna at a height greater than 3 meters.
*Please ensure that all connecting wires are securely fastened and all components are functioning properly before use.
*Please do not disassemble or modify without authorization, otherwise the warranty will not be provided. If you encounter any unresolved issues during installation or testing, please contact the original factory technical support.
WeChat QR code